Polyurethane

ASCC supplies raw materials for both cast urethane and blown polyurethane foams, for various industries and applications.

Our materials produce cast urethane products such as forklift tyres and rollers, and blown polyurethanes such as spray foam insulation, pour foam and buoyancy foam. Whatever your polyurethane requirement, ASCC has the “solutions for your needs”.

Please contact ASCC Limited for the correct recommendation for your project.

ASCC provides a range of high-quality Polyurethane Foams Systems, for Insulation in the Building, Marine, Mining, and Industrial industries.

HBS AGRIBALANCE: Is a two component, open-cell, spray applied, semi rigid, polyurethane foam system with an installed density of 12kg/m3.

Specific product features include: 

  • The product contains more than 20% renewable Agriculturally based materials (refined vegetable oils). 
  • The H2O blowing agent has zero ozone depleting potential. 
  • Common Applications:
  • Thermal insulation (R.78 per 25mm of applied Foam)
  • Acoustic Insulation 
  • Air barrier 
  • Protected internal or external application, above grade. 
  • Fire Retardant to: ASTM E84 ‘Class 1.
    Agribalance is CodeMark® approved in New Zealand for Thermal insulation in Residential Buildings

HEATLOK HFO: Is a two component, closed-cell spray applied, rigid polyurethane foam system, with an installed density of 35kg/m3. 

Specific product features include: 

  • The product uses recycled plastic materials and rapidly renewable soy oils. 
  • The HFO blowing agent has zero ozone depleting potential. 
  • The HFO blowing agent has Global Warming Potential (GWP) = 1 
  • Common Applications:
  • Thermal insulation (R1.0 per 25mm of applied Foam)
  • Air barrier 
  • Vapour Retarder 
  • Water resistive barrier 
  • Internal or protected external application, above and below grade. 
  • Fire Retardant to ASTM E84 ‘Class 1’ 
  • Heatlok HFO is CodeMark® approved in New Zealand for Thermal insulation in Residential Buildings.

PIP Foam 250CG: is a two components, closed-cell urethane, rigid foam system, specially formulated for pour-in-place and Injection applications, with a Density of 40kg/m2.

PIP Foam 250CG, uses a zero-ozone depleting blowing agent technology with a zero ODS (ozone depletion substances) and <5 GWP (Global Warming Potential).

Applications:

  • Chiller boxes and Water Heaters
  • Flotation / Buoyancy (Marine)
  • Insulation panels
  • Movie Sets
  • Residential and Garage Doors
  • Structural panels (SIPS Panels)
  • Taxidermy
  • Wall Cavity Insulation

PIP Foam 50: Is a two component, open-cell, semi-rigid polyurethane Low Density foam system specially formulated for pour-in-place applications, with a Density of 8kg/M2.

PIP 50 is a fully water blown foam system

Applications:

  • Thermal insulation for filling wall cavities.
  • Acoustic insulation for filling wall cavities.
  • Movie Sets

ASCC provides a range of high-quality Polyurethane Prepolymer Systems, for the Automotive, Construction, Marine, Mining, and Industrial industries.

Coim Hot-Cast Prepolymer Elastomers are available in the following types:

  • Conventional TDI-PPG
  • Conventional TDI-PTMEG
  • Conventional TDI-PCA
  • LF TDI-PTMEG (Free TDI less than 0.1%)
  • LF TDI-Ester (Free TDI less than 0.1%)
  • MDI-PTMEG
  • MDI-Ester


A range of Hardnesses is possible from ~40 Shore-A up to 80 Shore-D, with enhanced; Abrasion, Anti-Vibration, Rebound, Slip, Grip, Water, Oil, or Solvent resistance properties, as required by selection of Prepolymer and Curative combinations.

Typical applications include:

  • Anti Abrasion Pads
  • Anti vibration Mats
  • Automotive Bushes
  • Bridge support Pads
  • Chain and Conveyer Guides
  • Concrete Moulds
  • Dead-Blow Hammers and Bump-Stops (Zero Rebound Elastomer)
  • Flexi Hinges
  • Forklift Tyres
  • Impact absorbing Mats/Pads
  • Industrial Rollers
  • Marine Buffers
  • Mining and Quarry Screens
  • Pattern Making
  • Pipe Lining
  • Pipeline cleaning Pigs
  • Pump Impellers
  • Scraper Blades
  • Trolley Wheels